ABB softstarter | PSE142-600-70 1SFA897110R7000

The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

${{shopModel.rebate>0?shopModel.discountPriceStr:shopModel.formattedAmount}} ~~$ {{shopModel.formattedAmount}}~~

COUPON

Quantity：

Estimated Delivery Date: Jun 05 - Jun 05

Frequently Asked Questions

How to inquire about other products I am interested in?

Are the products genuine official originals?

Can the delivery time be shortened?

Specifications

Description

Reviews

Parameter Category & Item
1. Product Dimensions & Net Weight
Product Net Width	130 mm
Product Net Height	295 mm
Product Net Depth / Length	220 mm
Product Net Weight	4.4 kg
2. Core Electrical Specifications
Rated Operational Voltage	208 ... 600 V AC
Rated Control Supply Voltage (Us)	100 ... 250 V AC
Rated Control Circuit Voltage (Uc)	24 V DC
Rated Frequency (f)	50/60 Hz
3. Main Circuit Performance Parameters
Rated Operational Power - In-Line Connection (Pe)	(230 V) 40 kW(400 V) 75 kW(500 V) 90 kW
Rated Operational Current - In-Line Connection (Ie)	143 A
Service Factor Percentage	100 %
Built-in Electronic Overload Protection	Yes
Starting Capacity at Maximum Rated Current Ie	4xIe for 10s
Ramp Time Range	0 ... 30 s / 1 ... 30 s
Initial Voltage During Start Range	30 ... 70 %
Step Down Voltage Special Ramp	Not available
Current Limit Function Range	1.5 ... 7xIe
Switch for Inside Delta Connection	Not available
Number of Starts Per Hour	10 starts (at 3.5*Ie for 7 sec, 50% ON / 50% OFF Time)
4. Control & Signal Indication Features
Run Signal Relay	Yes
By-pass Signal Relay	Yes
Fault Signal Relay	Yes
Overload Signal Relay	Yes
Analog Outputs	4…20 mA
Completed Start Ramp Signal LED	Green
Ready to Start/Standby ON Signal LED	Green
Running Status Signal LED	Green
Ramping Up/Down Status Signal LED	Green
Protection Status Signal LED	Yellow
Fault Status Signal LED	Red
5. Core Product Functions
Product Main Type	PSE142
Standard Functions	Soft start with torque controlSoft start with voltage rampSoft stop with torque controlSoft stop with voltage rampKick startSequence startCurrent limitStart reverse (external contactors)Automatic restartEvent log
6. Protection Functions
Standard Protection	Electronic overload protection (EOL)Locked rotor protectionCurrent underload protection
7. Communication & Degree of Protection
Supported Communication Protocol	Modbus-RTU
Degree of Protection	acc. to IEC 60529, IEC 60947-1, EN 60529Main Terminals IP00
8. Terminal & Connection Specifications
Main Circuit Terminal Type	Bars
Main Circuit Connecting Capacity	Hole Diameter 8.5 mmRigid 1/2 x 2.5 ... 70 mm²Width and Thickness 17.5x5 mm
Control Circuit Connecting Capacity	Rigid 1 x 2.5 mm²Rigid 2 x 1.5 mm²
Supply Circuit Connecting Capacity	Rigid 1 x 2.5 mm²
Tightening Torque	Control Circuit 0.5 N·mMain Circuit 18 N·mSupply Circuit 0.5 N·m
9. UL/CSA Certified Technical Parameters
Horsepower Rating UL/CSA	(200 ... 208 V AC) Three Phase 40 Hp(220 ... 240 V AC) Three Phase 50 Hp(440 ... 480 V AC) Three Phase 100 Hp(550 ... 600 V AC) Three Phase 125 Hp
Maximum Operating Voltage UL/CSA	Main Circuit 600 V
Tightening Torque UL/CSA	Control Circuit 4.4 in·lbMain Circuit 159.3 in·lbSupply Circuit 4.4 in·lb
10. Environmental Specifications
Ambient Air Temperature Range	Operation: -25 ... +60 °CStorage: -40 ... +70 °C
11. Material & Regulatory Compliance
Conflict Minerals Reporting Template (CMRT)	CMRT - Conflict Minerals Reporting Template
REACH Declaration	REACh Declaration for all Softstarters
RoHS Declaration	RoHS II Declaration for all Softstarters
RoHS Compliance	Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Toxic Substances Control Act (TSCA)	TSCA declaration for Softstarters
WEEE Classification	Business To Business (B2B)
WEEE Category	5. Small Equipment (No External Dimension More Than 50 cm)
ABB EcoSolutions Environmental Product Declaration (EPD)	Environmental Product Declaration PEP PSE142...PSE170
12. Certificates & Declarations
CQC Certificate	CQC2011010304468089
CCC Declaration of Conformity	2020980304001545
CE Declaration of Conformity	CE Declaration of Conformity - Softstarter - PSE
DNV Certificate	1SFC132383M0001	TAE0000342
13. Package Information
Package Level 1 Width	203 mm
Package Level 1 Depth / Length	282 mm
Package Level 1 Height	363 mm
Package Level 1 Gross Weight	5.4 kg
Package Level 1 EAN Code	7320500400685
Package Level 1 Unit Specification	1 piece per box

Remarks

Product quality: 100% original brand new genuine products, supplied via official channels.
Warranty policy: 1 year official warranty is provided.
Lead time: Standard lead time is 4–6 weeks; the exact delivery time is subject to the factory production schedule at that time.
Prices of industrial control products are subject to market and raw material fluctuations. Please contact online customer service for the latest quotes and delivery times.